[blockquote]Karl Fensterstock said:
Why do the Bricks (4.11) suddenly a different address? With SBrick Simple Control everything is ok.
Bad with the new SBrickversion 4.0.0. It is becoming worse instead of better.
[/blockquote]
Dear Karl,
We changed the addresses because the iOS application. The SBricks have diferent address on Android and on iOS but from now the address will be the same on Android and on iOS too.
Where are the sbrick developpers?
The new version is not working
How long are we going have to wait before a fix?
I got my sbricks from the kickstarter in decembre 2014...
And we are still having developpent issues!
This is absolutly not serious
I just purchased a second Sbrick. With the Android app, Is it possible to be connected and communicate with them simulaneously? As whenever I attempt to run a function on each Sbrick my phone can only connect to one of them, then it reconnects to the other Sbrick. Is this just an issue that I am running into, because my phone is Android 4.4, or could it be issues with ram, as that has been a problem with other programs?
[blockquote]bricker bricker 72 said:
[blockquote]Karl Fensterstock said:
Why do the Bricks (4.11) suddenly a different address? With SBrick Simple Control everything is ok.
Bad with the new SBrickversion 4.0.0. It is becoming worse instead of better.
[/blockquote]
try to update to firmware 4.12 maybe is that the solution
[/blockquote]
Why should it be better? It gets worse from update to update!
[blockquote]bricker bricker 72 said:
[blockquote]Frederic Ayrault said:
I have upgraded to v4.0 Update 1 and I have a lot of connections problems now
[/blockquote]
try to update to firmware 4.12 maybe is that the solution
[/blockquote]
That is what I first did. Unfortunately it is not the first time I have problem with an update :-(
It seems that the problem has been solved, but I have stil a minor problem When I change to other creations the app makes no contact with the other creation! it only works when I close the app, and restart the app? any solution for this ?
it's a shame that I have to program all over again because the bricks get another numbers ?
I have 15 bricks for my semi trucks and trailers so it is a lot of work because their are also a lot of combinations of trucks and trailers.
with kind regards
Bricker Bricker 72
[blockquote]Karl Fensterstock said:
Why do the Bricks (4.11) suddenly a different address? With SBrick Simple Control everything is ok.
Bad with the new SBrickversion 4.0.0. It is becoming worse instead of better.
[/blockquote]
try to update to firmware 4.12 maybe is that the solution
Why do the Bricks (4.11) suddenly a different address? With SBrick Simple Control everything is ok.
Bad with the new SBrickversion 4.0.0. It is becoming worse instead of better.
Hi Guys,
Really thanks for your patience. The new (4.0.0) android application available in the google play:
https://play.google.com/store/apps/details?id=com.vengit.sbrick&hl=en
[blockquote]Stephen Wilson said:
I'm attempting to use (2) sbricks, Added new profile and downloaded, then I programmed all the channels on both sbricks. I only turned one on at a time to get correct channel for function needed. My Samsung S6 "finds & sees" both bricks after that , I've saved all info.
But when I attempt to operate, only one sbrick reacts! (even tho everything tests out OK with both sbricks during 'test mode')
Under phone control, only one sbrick works, I need BOTH WORKING TOGETHER !!
Both sbricks are 5.0 Hardware version, Firmware 1.0
[/blockquote]
Sorry guys, "false alarm", I re-programmed (or lack there of) my sbricks & now BOTH work great TOGETHER, Hooray !!
Now to finish this car and 'play'
I'm attempting to use (2) sbricks, Added new profile and downloaded, then I programmed all the channels on both sbricks. I only turned one on at a time to get correct channel for function needed. My Samsung S6 "finds & sees" both bricks after that , I've saved all info.
But when I attempt to operate, only one sbrick reacts! (even tho everything tests out OK with both sbricks during 'test mode')
Under phone control, only one sbrick works, I need BOTH WORKING TOGETHER !!
Both sbricks are 5.0 Hardware version, Firmware 1.0
[blockquote]mustafa conosoglu said: Any soulution ??? [/blockquote]
Hello!
We analized the problem, and it looks like a special case, which is only appear on a few android device.
If everything goes right, the new update will solve this, but we give you a reply soon what is the solution.
Best wishes,
Balint
Hi guys it is good to read that there will be a solution soon. But the solution took too long to mine opinion! You ask every time for a little patience but my first post due to the problem was on 16 mach and until today there is no solution I don’t think that is a little patience but a very lot of patience.
It almost appear you don’t respect your customers who pay for your product and count on it that it works. I understand that solve a problem take some time but it has to be faster than 15 weeks !!!!!!
Maybe an idea to solve this can be, to test better and take a little more time for you update the app and keep the older good working version available ( on your own website ) so that customers can go back to the previous version until the problem has solved, don’t make the update automatically ask the user if they want to update not everyone has the urge to update when they have a good working situation for them.
I hope you understand I am little bit frustrated because I cannot make video’s for my YouTube channel (youtube.com/brickerbricker72 )because my trucks and trailers use more than 2 bricks to drive and other functions until now I have promote your product because when it works it is fantastic product , but I begin to lose my believe in your product )-:
With kind regards,
Bricker Bricker 72
